The Samsung Printer setup procedure is very simple and conserves only less time.

  • First tear open the Samsung Printer packed cardboard box. Then take away the setup poster, reference guide, installation CD, power cord etc and move them away temporarily.
  • Now slowly take out the Samsung Printer from the cardboard box. Next to remove the transparent cover over the Printer.
  • Then take away the stuffing thermo cols on the sides of the Printer. Next clear all the blue colored tapes over and on the Printer.
  • Next lift open the scanner lid and take out the Styrofoam sheet. Then detach all other package materials such as tapes, stickers and other printing materials from the Printer.
  • Now open the top panel door and the cartridge access door. Then clear the thermo col flap and take out the roller from that cartridge access area.
  • Next clear the transparent tape and orange colored tape from that cartridge access area.
  • Now shake well the roller taken out once. Then insert the roller into the cartridge area back again.
  • Next close both the cartridge access door and the top panel door.

samsung printer setup - Configure your Samsung Printer

  • Next pull and extend out the paper tray on the front panel of your Samsung Printer. Then on that tray, press the flaps of the paper width guide on the right side to hold that paper width guide.
  • Then move that paper width guide to move both the paper width guides such that they are away from each other.
  • Now take a stack of unused papers and align them on the rough surface. Then insert these papers into the paper tray.
  • Next take the Power cord and fix the ends of the power cord to the back end of the Printer and power supply or electrical plug point respectively.
  • Next connect one end of the USB cable to the Printer into the Printer USB port.
  • Then switch ON your Samsung Printer by tapping the power button. Now set choose the region and tap OK.
  • Now connect the other end of the USB cable to your computer. Next you must install the printer driver software.
  • For that use the installation CD and insert that CD into the computer CPU. Next open the Printer driver folder on your computer.
  • On that make tick, tap Next and choose USB connection. Then make tick mark and choose all the soft wares to be installed.
  • Then tap Next and then Allow.
  • On that Setup complete window choose tap Finish. So that your Printer will now blink green color light and prints the page.