HP Deskjet 3700 Printer is one of the All-In-one series Printer that can make print, scan, fax and copy functions. This Printer allows the wireless printing of your documents and images. Then this Printer enables mobile printing of documents and photos from your mobile phone with the help of the AirPrint and ePrint service. Then the HP dj3700 manual can guide the users for Printer setup and Printer handling. You can login to the official website for download and installation of the driver software for your HP Deskjet 3700 Printer.This Deskjet 3700 Printer can operate in quiet mode operation that produces less noise with minimum disturbance.

Then you can make scanning of your documents and images with the help of HP Printer software. Also you can monitor the ink level with the help of HP Printer software. Then you can connect your Printer to the wireless network using the WPS(Wi-Fi Protected Setup). Next the usage of Web services allows the user to connect the Printer to the Internet, thus makes faster printing of documents and images. Then the Auto ON/OFF of this Printer enables automatic ON and OFF, thus conserves resources. Also this Printer gets into sleep mode automatically if the Printer activation not there for some time.

HP dj3700 manual - Printer Unpacking

  • First tear open the shipped cardboard box, to begin the Printer setup. Then take out the other items one-by-one from the box.
  • Those items include USB cable, HP Warranty card, cartridges, setup poster, reference manual and power cord. Then keep all these items away.
  • Next pull and take out the HP Deskjet 3700 Printer. Then clear the styro foam thermo cols at the sides and plastic cover around the Printer.
  • Now take the power cord. Then connect the ends of the power cord to the Printer’s back part and the power supply respectively.
  • Now switch ON your HP Deskjet 3700 series Printer. Then open the cartridge access door at the front side of your Printer, so that carriage in the cartridge access will move to the centre.
  • Next to install the cartridges, tear the packet and take out the cartridges. Then pull the orange-colored tab to clear the plastic tape over the cartridges.
  • After this, you must load the papers into the input tray. For that pull and take out the paper tray at the back part of the Printer.
  • Next take a bunch of aligned unused papers and then load these aligned papers into the input tray. Then adjust the plastic flap towards the loaded papers.

After you complete the setup of your HP Deskjet 3700 Printer, you can download and install the driver software for your Printer from the official website. You can refer the HP dj3700 manual to handle your Printer if you like to know more about your Printer handling.

HP dj3700 manual - Printer Driver Installation

The driver software can only acts as the mediator between your Printer and computer. So driver installation serves as the fundamental need for Printer operation. Then you can install the driver for your Printer in various ways. For this driver installation you can use the CD that came with your Printer. Else if you wish to install the latest driver version or you find that the CD is outdated, then you can login to the official website for the download and installation of the driver software for your Printer.

HP dj3700 manual provides you only the guidance to handle the HP dj3700 series Printer. Thus for driver installation, you must login to the official website. In that website, correctly choose the Printer’s model name and number, then install the driver.

Steps to Copy Your Documents into the Deskjet 3700 series Printer

You can connect your HP Printer with your Mac computer with the help of USB cable.

  1. First load papers into the input tray. At the time you load, make sure that you face the print side up and to the scanner’s right side, till that gets into the scan path.
  2. Then the scan light switches ON. Next tap either the Start Copy Color button or Start Copy button to produce a copy.
  1. Next if you wish to increase the number of copies, you must tap the button many times before two seconds.
  2. Then make sure that the original is pushed in correctly. If not, push that into the scan path with hand till that goes in correctly.
  3. Then the scanner will feed the original automatically to make a scan. After this, copy printing begins once the scan completes.

HP Deskjet 3700 Printer ePrint Service

  1. You can print from your ePrint enabled Printer in any place with the help of the HP ePrint feature.
  2. To use the ePrint, check that you connect your Printer to the network that makes you accessible to internet.
  3. Next check that you set up the Web Services. Then tap the Information button to print the Information page.
  4. Now know your Printer’s email address from that Information page. Then send your document through email to your Printer.
  5. For that, open your email application from your mobile device or the computer. Then create the new email.
  6. Next attach the document you wish to print. Then send that email to the Printer’s email address.
  7. Now make sure that type the HP ePrint email address into the To field. Then make sure that you do not type any extra email address in other fields.
  8. Now your Printer prints the attached document. Once the email is received, then it gets printed.

You can use the HP dj3700 manual to know the steps to handle your HP dj3700 series Printer.

HP dj3700 manual - Scan with HP Printer Software

Scan to computer
  1. First make sure that you install the HP Printer software, before you make a scan.
  2. Then check once that you switch ON the Printer and computer.
  1. First place the original copy’s print side up and on the scanner’s right side while you load the papers.
  2. Then push the paper into the scan path till that gets into the scan path and the scan light switches ON.
  3. Next make a double-click the Printer in your computer to open the Printer software.
  4. Windows 10: First tap Start and then choose All apps on your computer. Then tap HP and choose your Printer’s name.
  5. Windows 8.1: On the Start screen , in the bottom left corner, tap the down arrow. Then choose the Printer’s name.
  6. Windows 8: On the Start screen, make a right-click. Next on the app bar, tap All Apps and then choose the Printer’s name.
  7. Windows 7, Windows Vistas and Windows XP: On your computer, tap Start and choose All Programs.
  8. Next tap HP, then tap the Printer folder and then choose Printer’s name. Then tap Scan from the Printer software and then tap Scan a Document or Photo.
  9. Now choose the scan type you want and then tap Scan. Then in order to save the document as PDF file, select Save as PDF.
  10. Next to save the image as an image file, select Save as JPEG.
  1. First place the original copy print side up facing you and on the scanner’s right side.
  2. Then push this copy till it gets into the scan path and the scan light switches ON.
  3. Next make a double-click on the Printer’s name on your computer. Else proceed with the below steps to open the Printer software.
  4. Windows10: On the computer, tap Start and choose All apps. The tap HP and choose your Printer’s name.
  5. Windows 8.1: On the start screen’s left corner, tap the down arrow. Then choose the Printer’s name.
  6. Windows 8: On the start screen, make a right-click and tap All Apps in the app bar. Then choose the Printer name.
  7. Windows7, Windows Vistas and Windows XP: On the computer, tap Start and choose All Programs. Then tap HP, tap the Printer’s folder and choose your Printer name.
  8. Next on the Printer software, tap Scan and then tap Scan a Document or Photo. Then choose the scan type and tap Scan.
  9. Next select Email as PDF or Email as JPEG in order to open your email software that contains scanned file as attachment.
  1. First open HP Easy Scan that is present in the Applications folder.
  2. Next select the scan type profile you wish to get. Then tap Scan.
  1. You can scan documents and photos from your Printer to your device or computer with the help of the Webscan feature and using the web browser.
  2. If you not install the Printer software on your computer, then also this feature is available.
  3. Now open the embedded web server and then tap the Settings tab. Then tap Administrator Settings from the Security portion.
  4. Next choose Webscan from EWS so that enable Webscan and then tap Apply.
  5. After this, place the original copy side up facing towards you and at the scanner’s right side.
  6. Next push that original copy till gets into the scan path and scan light switches ON.
  7. After this open the embedded web server and then tap Scan tab. Then on the left pane, tap Webscan.
  8. Now you can change any settings and then tap Start Scan.

You can use the HP dj3700 manual to know the steps to handle your HP dj3700 series Printer.